Paver sealing requires real preparation to do right. At Green Blast Solutions, we pressure wash first, allow the surface to dry for up to 24 hours, walk the pavers for any visible damage, and cover surrounding areas before the sealer comes out. Applying product over a dirty or damp surface means bonding it to grime instead of pavers, and the job underperforms from the start.
Once the pavers are clean and fully dry, the sealer creates a protective layer that can help reduce staining, especially from oil, based on the selected product’s instructions. You also get genuine control over the finished look: a clear coat that keeps things natural, a color-shifting finish, or a darker tan appearance that adds depth to the surface. You pick the product, we walk you through the options, and the decision belongs to you.
Paver sealing runs two to three days, and that timeline is built around the prep work the job actually requires. The surface must be cleaned thoroughly and allowed to dry completely before any sealer goes down.
Before any work begins, we talk through what you want: a clear finish, a color-shifting tone, or a darker tan appearance. The product you select affects both the visual outcome and how long the sealer is rated to hold up. We share our honest take on the options and let you make the final call. For commercial jobs, we work out timing around lower-traffic periods at this stage as well.
The first hands-on step is a full pressure wash. Dirt, grime, oil residue, and surface contamination have to come off completely before sealer goes down, because applying product over a surface that isn’t properly clean means sealing in the problem rather than protecting the pavers.
After washing, we allow the surface to dry for up to 24 hours before returning. A damp surface prevents the sealer from curing correctly, and we also review the pavers for any cracks or damage the cleaning exposed so you can decide whether to address any issues before we seal.
Before spraying begins, we cover any surfaces, landscaping, and adjacent areas that shouldn’t receive sealant, keeping overspray control a standard part of every job rather than an afterthought.
With prep complete, we spray the selected sealer across the paver surface. Once done, one instruction matters most: cars and other heavy vehicles should stay off the sealed surface for at least 72 hours to allow the product to cure properly. On longevity, we go by what the product’s instructions say. Some sealers hold up for around six months, some for about a year, and some are rated for as long as five years depending on the product and the weather conditions the surface faces.
Green Blast Solutions offers a 30-day warranty on paver sealing, covering the preparation, the application, and the care put into the job. If there’s a workmanship issue within that window, we’ll address it.
What the 30-day warranty doesn’t claim to cover is the full rated lifespan of the product itself. That lifespan is set by the manufacturer of the sealer you selected, and it varies by product and conditions. A North Texas property dealing with hail, heavy rain, and wide temperature swings stresses a surface sealer differently than a mild climate would. We’d rather give you a clear, honest guarantee tied to the work we actually performed than attach a five-year number to a product we don’t manufacture.
Paver sealing usually runs between $1 and $3 per square foot. The final price depends on the finish you want and the product selected for the job.
It depends on the look you want for your pavers. We can give suggestions, but we let you make the final decision on the product and finish so the result matches your goals.
Most paver sealing projects take two to three days. We pressure wash first, allow the surface to dry for up to 24 hours, and then apply the sealer once the pavers are ready.
It depends on the product used and the weather conditions the surface is exposed to. Some products may last about six months, some around a year, and some as long as five years.
It can help, based on the instructions of the product being used. We explain that carefully because stain resistance depends on the selected sealer rather than one blanket promise.
No, sealing does not repair cracked or damaged pavers. We clean the surface first, point out any visible problem areas, and let you decide whether to repair them before moving forward.
Yes, we cover areas that should not receive sealant before we start spraying. That helps us keep the application focused on the pavers and protect nearby surfaces.
Cars and other heavy vehicles should stay off the sealed area for at least 72 hours. We give that guidance to help protect the finish after application.
Yes, we allow you to choose the product you want to use. We can recommend options, but we want you to have the final say.
Yes, we offer a 30-day warranty on this service. For longer-term performance expectations, we go by the product instructions instead of making inflated promises.
Yes, Green Blast Solutions is fully insured and offers free estimates. We want the quoting process to feel straightforward and low-pressure from the beginning.
In many cases, we can work from the property’s water source, but we can also bring water for smaller jobs if needed. We have a tank that can help us get started, although some larger projects may still require a connection on site.
We seal brick, concrete, and natural stone pavers across Frisco, with a prep-first process, your choice of finish and product, and a 30-day warranty backing every job. We’re fully insured and estimates are always free. Call us at 214-206-6118 or visit greenblastsolutions.com to get started.
