North Texas summers run hot and humid, and the periodic severe storms that roll through Frisco do more than knock down branches. They spread mold and algae across building exteriors, and that growth can even travel by wind from a neighboring property after a storm. It settles into commercial walls and facades and makes an otherwise well-run property look neglected. A periodic building wash is what keeps that buildup from taking hold.
We wash commercial building exteriors with a commercial-grade soft-wash system and our own equipment, so the growth comes off and the building looks cared for again. We bring water on site to get started and connect to site water for larger jobs, and our equipment safely reaches tall buildings. At Green Blast Solutions, we have built our commercial work around getting that done cleanly and on your schedule.
If your building could use it, call us at (214) 206-6118 and we will come take a look.
We wash the exteriors of hospitals and medical buildings, scheduling around a facility that never really closes. That means working during non-peak or after-hours windows and keeping entrances and walkways clear while we work.
We clean retail centers and storefront buildings so the whole exterior looks maintained, not just the parts people notice first. When a unit needs the glass, entrances, and signage brought up to match, our storefront cleaning covers that finish too, and we can work after business hours so shoppers and tenants are not disrupted.
We wash gas station building exteriors and canopy structures as part of exterior cleaning, working overnight where needed so the site keeps running. Pumps, islands, and the flatwork around them fall under a full gas station cleaning when the whole site needs it.
Limestone is a common Texas building material, and we wash limestone-faced buildings with soft-wash methods and chemistry matched to the stone.
Limestone shows up on buildings and facades all over Texas, and cleaning it the wrong way with high pressure can scar or pit the stone. It is soft enough that a hard blast leaves marks you cannot undo.
We clean limestone building facades with soft-wash methods and commercial-grade chemistry matched to the stone, so the growth and grime lift off without pressure damage. That same care covers the facade and the other limestone surfaces around a commercial property, so the whole exterior is treated the same way.
There are a few things that make the difference on a commercial building wash, and they come down to the equipment, the method, and how we work with you.
We use commercial-grade chemicals and professional equipment, never watered-down hardware-store products or rental machines, so the job is done right, even on large commercial buildings. Our system safely reaches tall exteriors, so a multi-story building gets cleaned to the top rather than only where a ladder can reach.
We do not max out the pressure. We let our chemicals do the work, so we clean without damaging brick, siding, or shingles, and a limestone or masonry facade gets the same protection.
Your building gets cleaned without a single lost hour of business. We fit the work into non-peak and after-hours windows, so the workday keeps moving and nobody gets turned away at the door.
We set honest, realistic expectations and never overpromise, and we schedule faster than most, communicating with you from quote through completion. On a building wash you deal directly with us from the walkthrough through the finished job, so your property is not left waiting weeks for an answer.
From the first call to the final walk-around, here is how a commercial building wash runs.
We come out, walk the site, take photos, and measure the square footage before we quote. That way the estimate reflects the actual building and the actual dirt, not a guess over the phone. On a brand-new structure, that same walkthrough drives our post-construction cleanup once the trades have cleared out.
We book the job and set it for non-peak or after-hours windows wherever that keeps your building running. You tell us how the property operates, and we work our timing around it.
We bring our own water to start the job and connect to your site water for larger buildings. That keeps us ready to work without depending on anyone else to get going.
We wash the building exterior with the P40 Comet soft-wash system and commercial-grade chemicals, matching the method to each surface. The soft-wash system reaches tall buildings, so we clean the full height without blasting the wall with pressure.
We rinse everything down so no chemical is left sitting on the property when we leave.
We walk the finished building with you, and we do not consider the job done until you are satisfied with the result.
Commercial building washing is priced by square footage, set once we measure the property on an on-site walkthrough.
For properties that need to stay clean year-round, a set schedule is the easy way to handle it. Set up a recurring commercial cleaning schedule and we’ll work out an ongoing discount after your first job. We match the cadence to the property, for example every six months, so the building stays maintained through the storm seasons without you having to think about booking each time.
No, we do not max out the pressure. We soft wash, letting commercial-grade chemicals do the work, so brick, limestone, and siding come clean without high-pressure damage. Our soft-wash system reaches the full height of the building, so we clean tall walls without ever needing to blast them.
We schedule around an open business. We run the work during non-peak or after-hours windows where that keeps your operation moving, so your building gets cleaned without interrupting your customers or staff.
Yes, we carry an on-board water tank and bring our own water to start the job. For larger buildings we connect to your site water so we can cover the full exterior without running short.
Reach out and we’ll come walk the building, measure it, and send a free estimate. We handle the timing around how your property runs, so getting a Frisco building on the schedule is simple. Call us at (214) 206-6118 to set it up.
