A fuel-service site in the Frisco area takes constant vehicle traffic day and night, and all that coming and going grinds grease, oil, and dirt straight into the concrete. North Texas storms make it worse, pushing mold and algae across the flatwork and entrances. The pump islands, the lot, and the storefront entrance end up collecting the worst of it, and it builds up faster than most operators expect.
We clean the whole site, from the fuel-pump islands and parking areas to the storefront entrance and the dumpster areas, pulling up grease, oil, dirt, mold, and algae so the property looks cared for again. We work around a station that stays open, so cleaning the site doesn’t mean closing the doors.
When you’re ready to get a look at the grime and get it handled, give us a call at (214) 206-6118 and we’ll set up a time to come out and scope the job.
Cleaning a working fuel site right takes the right chemistry and the right machine for the grease, oil, and ground-in traffic film that a rental setup simply can’t touch.
We run commercial-grade degreaser paired with a 10 GPM machine and a surface cleaner. That is equipment sized for the baked-in grease and oil a fuel site collects, so the buildup actually lifts off the concrete instead of getting pushed around.
We schedule the work overnight so the station stays open with minimal disruption. You keep selling fuel through the day, and the site still gets handled without costing you a shift of sales.
You get a straight answer before we start. We walk you through exactly what degreasing will do on an older fuel-site stain, so you have a realistic picture of the result up front and there are no surprises when we finish.
A gas station’s ground-in grease and fuel staining calls for commercial-grade degreasers and professional machines. That is the difference between pulling a stain up and merely moving it, which is exactly why a rental unit is the wrong tool for a fuel site.
We come out, walk the site, and scope the work, from the pump islands and parking areas to the storefront entrance and the dumpster areas, so the quote matches what your site actually needs. If the dumpster pad cleaning behind the store needs the same grease and degreaser treatment, we scope that in the same visit. The estimate is free, and we bring our own water and can connect to on-site water for larger jobs. The easiest way to get started is to reach out to us; a call is best.
Once the quote is approved, we schedule the work overnight so the station stays open with minimal disruption. You sell fuel during your normal hours, and we do the cleaning through the quiet part of the night.
For oil and fuel staining, we apply a commercial degreaser and let it dwell 10 to 15 minutes. That gives it time to break down the buildup first, so the surface cleaner has an easier job when we move to the next step. It’s the same approach we bring to drive-through cleaning, where baked-in grease sits on the concrete the same way.
We run a surface cleaner over the flatwork, then rinse everything thoroughly so no chemical is left on the property. Larger lots get the same treatment we use for parking lot and garage cleaning, sized to the square footage. Where mold and algae have taken hold, we bring in SH alongside the degreaser, clearing the organic growth in the same pass that handles the grease and oil.
When the work is done, we walk the finished site with you or your property manager. We stand behind what we do, so if something isn’t right, we make it right before we call the job done.
Our degreasing process typically removes 80 to 95% of grease and oil staining; we don’t promise 100% because how much lifts depends on how old the stain is. Older, ground-in fuel staining is the hardest to move, and we pull up as much of it as the surface will give.
A working fuel site takes constant traffic, so cleaning it on a regular schedule keeps grease, oil, and organic staining from building up year-round. Set up a recurring commercial cleaning schedule and we’ll work out an ongoing discount after your first job. The best time to ask about a schedule that fits your site is when you get your quote.
Ready to get the grease, oil, and buildup off your fuel site? Reach out for a free quote and we’ll come out, scope the work, and get you on the schedule for a night that keeps your pumps flowing. Call us at (214) 206-6118 and we’ll take it from there.
